1
Passed
Bay Shore, New York
0.00%
0%
Description
Continuous Steel Strip Dual Cabinet Coil to Coil Shot Blast,?Cleaning & Descaling System With (8) 100 HP SHOT WHEELS, New 1997
Line Capacities as follows:
? The Shot Blaster is capable of 60""?x heavy gage steel or stainless. The capacity for the Strilich coil feed equipment can be increased to 60""?x 1/4"" by replacing the straightener and making some additional modifications. The capacity for stainless should be D rated and calculated accordingly.
? Material Type:?Mild Steel &?Stainless
? Coil width:?60""?max. / 24""?minimum
? Material thickness range (using existing straightener):?.060"" @60""?wide, .075""-.194""?@50""?wide, .277""? @ 37""?wide
? Entry Coil:?72""?OD / 20-24""?ID
? Exit Coil ID:?24""
? Maximum Yeild:?50,000 psi
? Line Speed:?250 fpm
? Flatness:?Remove coil set
Line Consists of the following:
A) Strilich 40,000 lb. cap. Side Mast Type Coil Car, 60""?max. width, 72""?max. OD, 0-24""?vertical lift
B) Strilich Model SR40 Single Mandrel Stock Reel Uncoiler w/40,000 lb. cap., 60""?wide, 72""?OD?(max.), 19.5""-24.5"" hydraulic expansion, 6""?hydraulic sliding base, 50 HP?DC?drive, negative brake to back tension material.
C) North American Photoelectric Automatic Single Edge Guide Dectector System
D)?Strilich Hydraulic Z-Type Peeler Table, 60""?maximum width
E)?Strilich Roll Straightener, 7 Rolls, 6""?diameter, 60""?max. width, 24""?minimum, ?Material Thickness: .277""?max. @?37""?wide, .060""?minminimum, 50,000 psi, 7 Work rolls (3 up &?4 down), Work roll size:?6""?dia. x 66""?face, Back-up rolls (backed up at center), 250 fpm, CMC: 125 HP, Dialmaster controller, 125 HP?850 RPM?DC?motor, Entry Pinch Rolls:?8""?dia.
F) Strilich Hydraulic Crop Shear, 60""?max. width x .277 max. thickness
G) Reject Table &?Buggy, Maximum reject length 48""
H)?Blastec Dual Cabinet Shot Blast Cleaning Machine, Each Cabinet equipped with (4) 100 HP Blastec Shot Wheels (total of (8)?shot wheels), complete with recovery system, hoppers, s/n 9603,
includes (2)?Farr dust collectors & (2)?New York blower systems.
I) Strilich Adjustable Entry Guide, Passline Rolls, 60""?max. width
J)?Strilich Hinge Type Threading Table, 60""?max. width
K) North American Photoelectric Automatic Single Edge Guide Dectector System
L)?Strilich 40,000 lb. cap. x 60""?wide Gear Box Type Recoiler, 40,000 lb. max. coil weight, 60""?max. coil width, 24""?coil ID, 72""?coil OD?max., automatic hydraulic expansion, 100 HP?DC?drive, overarm powered Snubber roll, hydraulic sliding base, power push off
M)?(2) Strilich Hydraulic Side Mast Type Coil Cars, 40,000 lb. cap., 60""?max. width, 24""?coil lift
N)?Strilich 2 Arm Exit Turnstile, 40,000 lb. cap., 60""?max. coil width per arm
*Location of line:?Ashland, Tennessee"
Auction Details
Rigging/Removals
T&Cs & Important Info
Ask seller a question
Continuous Steel Strip Dual Cabinet Coil to Coil Shot Blast,?Cleaning & Descaling System With (8) 100 HP SHOT WHEELS, New 1997
Line Capacities as follows:
? The Shot Blaster is capable of 60""?x heavy gage steel or stainless. The capacity for the Strilich coil feed equipment can be increased to 60""?x 1/4"" by replacing the straightener and making some additional modifications. The capacity for stainless should be D rated and calculated accordingly.
? Material Type:?Mild Steel &?Stainless
? Coil width:?60""?max. / 24""?minimum
? Material thickness range (using existing straightener):?.060"" @60""?wide, .075""-.194""?@50""?wide, .277""? @ 37""?wide
? Entry Coil:?72""?OD / 20-24""?ID
? Exit Coil ID:?24""
? Maximum Yeild:?50,000 psi
? Line Speed:?250 fpm
? Flatness:?Remove coil set
Line Consists of the following:
A) Strilich 40,000 lb. cap. Side Mast Type Coil Car, 60""?max. width, 72""?max. OD, 0-24""?vertical lift
B) Strilich Model SR40 Single Mandrel Stock Reel Uncoiler w/40,000 lb. cap., 60""?wide, 72""?OD?(max.), 19.5""-24.5"" hydraulic expansion, 6""?hydraulic sliding base, 50 HP?DC?drive, negative brake to back tension material.
C) North American Photoelectric Automatic Single Edge Guide Dectector System
D)?Strilich Hydraulic Z-Type Peeler Table, 60""?maximum width
E)?Strilich Roll Straightener, 7 Rolls, 6""?diameter, 60""?max. width, 24""?minimum, ?Material Thickness: .277""?max. @?37""?wide, .060""?minminimum, 50,000 psi, 7 Work rolls (3 up &?4 down), Work roll size:?6""?dia. x 66""?face, Back-up rolls (backed up at center), 250 fpm, CMC: 125 HP, Dialmaster controller, 125 HP?850 RPM?DC?motor, Entry Pinch Rolls:?8""?dia.
F) Strilich Hydraulic Crop Shear, 60""?max. width x .277 max. thickness
G) Reject Table &?Buggy, Maximum reject length 48""
H)?Blastec Dual Cabinet Shot Blast Cleaning Machine, Each Cabinet equipped with (4) 100 HP Blastec Shot Wheels (total of (8)?shot wheels), complete with recovery system, hoppers, s/n 9603,
includes (2)?Farr dust collectors & (2)?New York blower systems.
I) Strilich Adjustable Entry Guide, Passline Rolls, 60""?max. width
J)?Strilich Hinge Type Threading Table, 60""?max. width
K) North American Photoelectric Automatic Single Edge Guide Dectector System
L)?Strilich 40,000 lb. cap. x 60""?wide Gear Box Type Recoiler, 40,000 lb. max. coil weight, 60""?max. coil width, 24""?coil ID, 72""?coil OD?max., automatic hydraulic expansion, 100 HP?DC?drive, overarm powered Snubber roll, hydraulic sliding base, power push off
M)?(2) Strilich Hydraulic Side Mast Type Coil Cars, 40,000 lb. cap., 60""?max. width, 24""?coil lift
N)?Strilich 2 Arm Exit Turnstile, 40,000 lb. cap., 60""?max. coil width per arm
*Location of line:?Ashland, Tennessee"
Surplus To The Needs Of A Major Hot Water Heater Mfr & Other Facilities
Ends from
Venue Address
VARIOUS LOCATIONS, CHECK ITEM DESCRIPTION FOR ACTUAL LOCATION
Bay Shore
New York
United States
For US Industrial Auctions delivery information please telephone 516-819-6951.
Important Information
ONLINE AUCTION ONLY. ITEMS LOCATED AT VARIOUS LOCATIONS CHECK ITEM DESCRIPTION FOR ACTUAL LOCATION
Terms and Conditions
A VALID CREDIT CARD WILL BE REQUIRED FOR REGISTRATION
PURPOSES BUT WILL NOT BE ALLOWED FOR PAYMENTS OF ASSETS
15% BUYER'S PREMIUM WILL APPLY TO ALL PURCHASES.
Payment: Wire transfer is the only acceptable form of
payment. FULL SETTLEMENT TO BE MADE DAY OF SALE. All sales
are final and are payable at the conclusion of the sale. A
buyer's premium and sales tax will be charged on all
purchases.
Removal of Purchases: Cost, responsibility, and risk of
removal of purchases remain with the purchaser. It is the
purchaser's responsibility to restore/repair all real or
personal property that is altered or damaged as a result of
the removal. Purchases must be removed from the premises in
the time allocated as announced and/or posted by the
Auctioneers. US Industrial Auctions reserves the right to
charge the purchaser for the costs of storage and/or
disposal beyond the removal period. Items not picked up in
the time allocated will be considered abandoned. NO
purchases may be removed until after the conclusion of the
sale. No claims of any kind shall be allowed for any item
not removed or after an item has been removed by the
purchaser.
Disclaimer of Warranties: Everything will be sold "AS IS,"
"WHERE IS," "AS AVAILABLE," "WITH FAULTS," with no
representations, expressed or implied. US Industrial
Auctions, as agent and seller, expressly disclaims any
warranty as to fitness or usability of all the assets, and
the buyer expressly waives any claims in respect to any
possible future use of any asset purchased for any purpose
whatsoever. US Industrial Auctions, seller and/or
advertising agents will not be held responsible for
advertising inaccuracies or discrepancies. Prospective
buyers are advised that US Industrial Auctions does not
guarantee the accuracy of description or condition of the
subject property. Prospective buyers are urged to inspect
all items, deductions will not be allowed on damaged goods
since everything is sold "as is" and without recourse. No
advice or information, whether written or verbal, obtained
by a prospective buyer from US Industrial Auctions shall
create any warranties or responsibility for items purchased.
The purchaser hereby assumes and does agree to indemnify and
hold US Industrial Auctions and seller harmless from any
future claim which shall pertain to the fitness or use of
the item being purchased.
Limitations of Liability: For any reason whatsoever, an item
purchased cannot be delivered, the buyer waives liability on
the part of US Industrial Auctions and further agrees that
any obligation of said item is limited to the bid and paid
for price of item. Persons attending the auction preview,
sale, or removal assume all risks of damage of or loss to
person and property and specifically release and indemnify
US Industrial Auctions and sellers from liability. US
Industrial Auctions and/or seller shall not be liable by
reason of any defect in or condition of the premises in
which the sale is held.
Vehicles: US Industrial Auctions is not responsible for any
penalties on past-due registrations or smog compliance
certificates. It is the bidder's sole responsibility to
check all vehicles for plates/tags, smog devices, and/or any
defects.
A 15% BUYER'S PREMIUM WILL APPLY TO ALL PURCHASES.
See Full Terms And Conditions
PURPOSES BUT WILL NOT BE ALLOWED FOR PAYMENTS OF ASSETS
15% BUYER'S PREMIUM WILL APPLY TO ALL PURCHASES.
Payment: Wire transfer is the only acceptable form of
payment. FULL SETTLEMENT TO BE MADE DAY OF SALE. All sales
are final and are payable at the conclusion of the sale. A
buyer's premium and sales tax will be charged on all
purchases.
Removal of Purchases: Cost, responsibility, and risk of
removal of purchases remain with the purchaser. It is the
purchaser's responsibility to restore/repair all real or
personal property that is altered or damaged as a result of
the removal. Purchases must be removed from the premises in
the time allocated as announced and/or posted by the
Auctioneers. US Industrial Auctions reserves the right to
charge the purchaser for the costs of storage and/or
disposal beyond the removal period. Items not picked up in
the time allocated will be considered abandoned. NO
purchases may be removed until after the conclusion of the
sale. No claims of any kind shall be allowed for any item
not removed or after an item has been removed by the
purchaser.
Disclaimer of Warranties: Everything will be sold "AS IS,"
"WHERE IS," "AS AVAILABLE," "WITH FAULTS," with no
representations, expressed or implied. US Industrial
Auctions, as agent and seller, expressly disclaims any
warranty as to fitness or usability of all the assets, and
the buyer expressly waives any claims in respect to any
possible future use of any asset purchased for any purpose
whatsoever. US Industrial Auctions, seller and/or
advertising agents will not be held responsible for
advertising inaccuracies or discrepancies. Prospective
buyers are advised that US Industrial Auctions does not
guarantee the accuracy of description or condition of the
subject property. Prospective buyers are urged to inspect
all items, deductions will not be allowed on damaged goods
since everything is sold "as is" and without recourse. No
advice or information, whether written or verbal, obtained
by a prospective buyer from US Industrial Auctions shall
create any warranties or responsibility for items purchased.
The purchaser hereby assumes and does agree to indemnify and
hold US Industrial Auctions and seller harmless from any
future claim which shall pertain to the fitness or use of
the item being purchased.
Limitations of Liability: For any reason whatsoever, an item
purchased cannot be delivered, the buyer waives liability on
the part of US Industrial Auctions and further agrees that
any obligation of said item is limited to the bid and paid
for price of item. Persons attending the auction preview,
sale, or removal assume all risks of damage of or loss to
person and property and specifically release and indemnify
US Industrial Auctions and sellers from liability. US
Industrial Auctions and/or seller shall not be liable by
reason of any defect in or condition of the premises in
which the sale is held.
Vehicles: US Industrial Auctions is not responsible for any
penalties on past-due registrations or smog compliance
certificates. It is the bidder's sole responsibility to
check all vehicles for plates/tags, smog devices, and/or any
defects.
A 15% BUYER'S PREMIUM WILL APPLY TO ALL PURCHASES.
